- Able to detect mobile and wireless signals at a much greater distance compared to conventional RF detectors (at least,10 times more)
- Selective: interference resistant and with a high sensitivity
- Has worldwide coverage of mobile standards – can detect all existing bands of GSM, CDMA, 3G, 4G/LTE and 5G in the range up to 6 GHz
- Able to detect all types of wireless signals,including Wi-Fi 2.4 GHz, Bluetooth, Wi-Fi 5 GHz, DECT, ISM 434MHz, ISM 968 MHz and ISM 915 MHz
- Detection of at least 26 mobile and wireless bands
- Can be adjusted to the frequency allocation of the country of use
- A selective multi-band principle of work informs the user of exactly which signals were found
- The mode of analysis of a certain band facilitates the physical search of a transmitter
- A separate mode for the detection of GPS trackers with history accumulation (TRACKER)
- ALARM function warns the operator about exceeding the threshold, both with sound and visually
- 43 threshold levels for setting optimal sensitivity
- Can be set up for specific tasks, for example, for the detection of Wi-Fi only, etc.
- Operation modes:
- ALL BANDS (detection on all bands)
- GROUP (detection on the selected group of bands)
- BAND (analysis of a separate band)
- TRACKER (detection of GPS trackers)
- Two antenna inputs and two antennas in the set for ensuring maximum sensitivity
- The high-band directional antenna facilitates locating of transmitters above 2400 MHz
- The built-in rechargeable battery provides an operational time of up to 5 hours
- USB recharging
Specification
- Number of bands: 26
- Antenna inputs:
- Input 1: SMA, 2400 – 6000 MHz
- Input 2: SMA, 600 – 2400 MHz
- Operation modes:
- ALL BANDS (detection on all bands)
- GROUP (detection on the selected group of bands)
- BAND (analysis of a separate band)
- TRACKER (detection of GPS trackers)
- Alarm function: Visual or audio
- Number of alarm threshold levels: 43
- Sound signals: Alarm, depression of buttons
- Regions:
- US (bands of the USA)
- EU (European bands)
- TOTAL (all bands)
- Operating and control elements:
- Joystick: move left-right, up-down, threshold adjustment, mode selection
- Button POWER OFF: switch off
- Button POWER ON: switch on
- Button ALARM: alarm
- Button AUDIO: sound
- Button BANDS: band set up
- Button BACK: exit to the previous mode
- Button SAVE (storing the current state)
- Power supply source: USB 5V
- Power: Built-in rechargeable battery 6800 mA*h 3.7 V
- Battery operational resource: Up to 5 hours
- Mass:
- The device without antenna: 750 g
- Packed: 1500 g
- Dimensions:
- The device without antenna: 208 x 86 x 41mm
- Packed: 27 x 22 x 10 cm
- Operating temperature range: -5…50 °C
Supplied set
- Device
- High-band antenna Micro-Pointer LPDA-12
- Low-band rod antenna
- Charging cable USB Type C
- 2 x Angle adapter SMA
- A case for transportation
- User’s Manual